Ninety-Eight FWD V6-181 3.0L (1985)
Wheels: All Technical Service Bulletins
Wheels (Aluminum) - Balance Weight Usage
NUMBER:
92-T-73
CORP.REF.NO: 293502
DATE:
April 1992
SECTION:
3
SUBJECT
INFORMATION ABOUT COATED BALANCE WEIGHT
USAGE FOR ALUMINUM WHEELS
MODELS/YEARS
1983-92 ALL MODELS
This bulletin cancels and supersedes Dealer Technical Bulletin 91-T-01, which should be discarded.
Wheel balance weights are now available through GM Dealer Equipment at a very attractive price. These are original equipment weights that will assure
best fft to GM original equipment wheels. The AW sedes and MC series of polyester coated weights are offered for aluminum wheels. IT IS
IMPERATIVE THAT COATED WEIGHTS BE USED ON ALUMINUM WHEELS TO PREVENT COSMETIC DAMAGE TO THE WHEEL. A
plastic tipped hammer should also be used to prevent damage to the weight's coating during installation.
Usage of AW and MC weights on aluminum wheels by GM vehicle line is shown below. Using the incorrect type of weights will result in improper fit,
and such weights may fall off the wheel. This information should be posted near the wheel balancer to aid in weight selection.
Uncoated XT type weights are also offered for passenger car steel wheels.
