Ninety-Eight FWD V6-181 3.0L (1985)
Suspension Spring ( Coil / Leaf ): Service and Repair
Fig. 3 Installing tool J-23028-01
Fig. 4 Coil spring replacement
1.
Support vehicle so the rear wheel and control arm hang free. Remove rear wheel.
2.
Disconnect rear stabilizer bar from knuckle bracket.
3.
Disconnect electronic level control height sensor link if removing right control arm.
4.
Disconnect parking brake cable clip from frame if removing left control arm.
5.
Place tool J-23028-01 in position to cradle control arm bushings, Fig. 3. Tool J-23028-01 should be secured to a suitable jack, otherwise,
personal injury could result.
