Ninety-Eight FWD V6-181 3.0L (1985)
Wheel Bearing: Service and Repair
Hub & Bearing Assembly Replace - Rear
REAR WHEEL BEARINGS AND/OR HUB
Fig. 2 Hub & bearing assembly
1.
Raise and support rear of vehicle. Remove wheel assembly and brake drum. Do not hammer on drum since damage to bearing may occur.
2.
Remove four hub and bearing assembly to axle attaching bolts and the assembly from axle, Fig. 2.
3.
Reverse procedure to install. Torque attaching bolts to 51 ft. lbs.
