Ninety-Eight FWD V6-181 3.0L (1985)
FIGURE 1 - BOTTOM PAN, FILTER, ACCUMULATOR AND GOVERNOR COVER ASSEMBLY
Service Action:
Before removing the transaxle from the vehicle, inspect the 2nd clutch feed passage for blockage or a partially drilled condition. To perform this
inspection, remove the following items (refer to Figure 1): transaxle bottom pan (59), filter (58), accumulator cover (121) with governor pipes (124, 125)
and governor pipe retainer (129), accumulator cover spacer plate (120) and gaskets (119).
