Ninety-Eight FWD V6-181 3.0L (1985)
a.
Purchase sodium bicarbonate (baking soda) locally.
b.
Sprinkle affected area with baking soda.
c.
Mix a solution of one (1) part baking soda by volume to one (1) part water.
d.
Brush affected parts and areas liberally with solution, making sure to cover all surfaces.
e.
Let stand until affected area stops gassing (foaming).
f.
Rinse with clean water.
g.
Repeat application five (5) times and rinse.
4.
After neutralizing acid in Step 3, proceed to correct possible degradation, as listed below. Perform only the appropriate steps listed where acid
presence was noted:
STANDARD PAINT REFINISH PROCEDURES SHOULD BE USED WHEN REPAIRING PAINT THAT WAS DAMAGED BY BATTERY
ACID.