Ninety-Eight FWD V6-181 3.0L (1985)
FIGURE 2
7.
Locate spacers in opening as shown - Figure 2 - spacer, part number 20603560. To install spacer, trim urethane at spacer location to the sheet
metal, cement spacer on sheet metal parallel to edge of flange.
FIGURE 3
8.
Position windshield glass into opening. Align for uniform fit to roof and windshield pillars.
Mark position by applying masking tape to windshield and body. Cut tape at edge of glass and body. This will provide a means to align windshield
into body during installation (see Figure 3).
Utilizing a business card or similar item, run the card between the windshield and the windshield pillar garnish molding to check for clearance along
