Ninety-Eight FWD V6-260 4.3L DSL (1985)
8.
Repeat step 2 of "inspection" procedure to ensure the low vacuum warning system operates, and correct as required.
9.
Install Campaign Identification label.
C.
Campaign Identification Label Installation
Each vehicle modified in accordance with the instructions outlined in this procedure will required a Campaign Identification label. Each label
provides a space to include the campaign number, the five (5) digit dealer code of the dealer performing the campaign service, and the date vehicle
was campaigned. This information may be inserted with a typewriter or ballpoint pen. When installing label, clean the surface of the radiator upper
mounting support and apply the campaign label where it is readily visible.
PARTS INVOLVED
Low vacuum brake module, part number 25516367, is to be obtained from WDDGM.
DO NOT ORDER A PART UNLESS YOU HAVE A VEHICLE TO CAMPAIGN AS VERY FEW VEHICLES ARE INVOLVED.
So that parts will be obtained as soon as possible, they should be ordered from WDDGM on a C.I.O. order with NO special instruction code, but order
on an advise code (2).
WARRANTY CLAIM INFORMATION
Operation
Failure Code
Labor Operation
Labor Hours
Inspection Only
96
V3140
.2
Inspect and Install
96
V3141
.4
Module
.1 hour for clerical administration may be added to the above operation.
