Ninety-Eight FWD V6-260 4.3L DSL (1985)
Figure 2
7.
Locate and attach spacers, P/N 20603560, around window opening. For Toronado, refer to Figure 1. For 1985-1988 Ninety-Eight refer to Figure
2. 1989 Ninety-Eight do not use spacers, they must use the original J-type upper reveal molding.
8.
Position windshield glass into opening. Align for uniform fit to roof and windshield pillars.
With glass in proper position in opening, apply a piece of masking tape over edge of glass and adjacent body pillar. Slit tape vertically at edge of
glass. During installation, tape on glass can be aligned with tape on body to guide glass onto desired position.
9.
Remove windshield from body and prep as follows utilizing primers contained in the urethane repair kit number 9636067:
a.
Clean windshield with general glass cleaner.
b.
Apply clear primer glass prep No. 1 to entire perimeter of glass edge inboard (approximately 12 mm). Wipe primer off with a clean, dry
cloth.
