Omega L4-151 2.5L VIN 5 2-bbl (1982)
Wiper Motor: Service and Repair
1.
Remove wiper arms as outlined previously.
2.
Remove the lower windshield reveal molding, front cowl panel and cowl screen. Disconnect washer hose. Prior to removing the front cowl
screen, mask the corners of the hood to prevent damage to paint.
3.
Loosen but do not remove transmission drive link to motor crank arm attaching nuts. Then, disconnect drive link from motor crank arm.
4.
Disconnect wiper motor electrical leads.
5.
Remove wiper motor attaching bolts.
6.
On models equipped with A/C, support motor assembly and remove motor crank arm. Use a suitable pair of locking pliers and wrench, remove
crank arm nut and the crank arm.
7.
On all models, rotate motor assembly upward and outward to remove.
8.
Reverse procedure to install.
