Silhouette V6-191 3.1L VIN D TBI (1995)
Ignition Rotor: Service and Repair
REMOVE OR DISCONNECT
1. Ignition key "OFF."
2. Distributor cap by simultaneously depressing and rotating screws counterclockwise 180 degrees.
3. Cap from housing and position to side.
4. Screws retaining rotor to shaft assembly.
5. Rotor from shaft assembly.
INSTALL OR CONNECT
1. Rotor onto shaft assembly.
2. Rotor screws.
3. Distributor cap to housing.
4. Simultaneously depress and rotate cap screws clockwise 180 degrees.
