Silhouette V6-191 3.1L VIN D TBI (1995)
4. Thermal expansion valve capillary tube to evaporator core outlet tube with retaining clip. Make certain that capillary tube is attached to the
horizontal mid-point of the evaporator core outlet tube.
5. Heater and A/C evaporator blower cover case (1140) to heater and A/C evaporator case (1121) with attaching screws.
Tighten:
^
Screws to 3 Nm (27 lb. in.).
6. Rear compartment outlet (beltline-horizontal) duct seal to top of two case halves (1121/1140).
7. Drain case (1139) to evaporator and blower module (1115) with retaining screws.
Tighten:
^
Drain case retaining screws to 3 Nm (27 lb. in.).
8. Heater core (1128) into evaporator and blower module (1115).
9. Heater core clamp (1134) with retaining screw.
Tighten
^
Heater core clamp retaining screw to 3 Nm (27 lb. in.).
10. Heater core clip (1129) with retaining screws.
Tighten:
^
Heater core clip retaining screws to 3 Nm (27 lb. in.).
11. Heater outlet case (1131) to evaporator and blower module (1115) with retaining screws.
Tighten:
^
Heater outlet case retaining screws to 3 Nm (27 lb. in.).
12. Heater core outlet pipe clamp (1135) with retaining screw.
13. Heater core inlet pipe clamp (1152) with retaining screw.
Tighten:
^
Heater core clamp retaining screws to 3 Nm (27 lb. in.).
14. Clamps and heater inlet/outlet hoses to heater core pipes.
15. Evaporator and blower module (1115) to vehicle.
