Silhouette V6-191 3.1L VIN D TBI (1995)
Coolant Temperature Sensor/Switch (For Computer): Description and Operation
Engine Coolant Temperature Sensor
The Engine Coolant Temperature (ECT) sensor is a thermistor (a resistor which changes value based on temperature) mounted in the engine
coolant stream. Low coolant temperature produces a high resistance (100,000 ohms at -40°C/-40°F) while high temperature causes low resistance
(70 ohms at 130°C/266°F).
The Powertrain Control Module (PCM) supplies a 5 volt signal to the coolant sensor thru a resistor in the PCM and measures the voltage. The
voltage will be high when the engine is cold, and low when the engine is hot. By measuring the voltage, the PCM calculates the engine coolant
temperature. Engine coolant temperature affects most systems the PCM controls.
A failure in the coolant sensor circuit should set either a DTC 14 or DTC 15. Remember, these DTC(s) indicate a failure in the engine coolant
temperature circuit, so proper use of the chart will lead to either repairing a wiring problem or replacing the sensor, to properly repair a problem.
