Silhouette V6-191 3.1L VIN D TBI (1995)
Throttle Valve Cable/Linkage: Adjustments
FWD Turbo Hydra-Matic 3T40 (125C)
With Lock TAB Adjusting Cable
Fig. 5 Detent/TV Cable Adjuster. Lock Tab Adjusting Cable
1. Depress and hold readjust tab, Fig. 4.
2. Move slider back through fitting in direction away from throttle idler lever until slider stops against fitting, then release readjust tab.
3. Rotate throttle idler lever to full travel stop position, then release throttle lever.
Without Lock TAB Adjusting Cable
Fig. 6 Detent/TV Cable Adjustment.
1. Ensure cable is in "Non-Adjusted" position as shown, Fig. 5.
2. Using a suitable torque wrench, rotate idler pulley counterclockwise to 65 inch lbs.
3. Ensure cable moves freely, then test drive vehicle.
