Silhouette V6-3.4L VIN E (1996)
^
Lightly lubricate O-rings with mineral base 525 viscosity refrigerant oil.
^
Clean refrigerant fittings with mineral base 525 viscosity refrigerant oil. Do not allow refrigerant oil to enter A/C system.
12. A/C evaporator hose (193) to A/C evaporator (194).
Tighten
^
A/C evaporator hose-to-A/C evaporator fitting to 24 Nm (18 lb.ft.).
Use a backup wrench while torquing fitting.
13. O-ring (191) to A/C accumulator hose (190).
14. A/C accumulator hose (190) to A/C evaporator (194).
Tighten
^
Evaporator fitting to 41 Nm (30 lb.ft.).
Use a backup wrench while torquing fitting.
15. Temperature case (195) and gasket (197) to blower and air inlet case (196) with two screws (198).
Tighten
^
Upper temperature case-to-blower and air inlet case screws (198) to 7 Nm (62 lb.in.).
16. Two lower screws (198) to temperature case.
Tighten
^
Lower temperature case-to-blower and air inlet case screws (198) to 7 Nm (62 lb.in.).
17. Temperature valve actuator.
18. Heater Core.
^ Refill engine coolant.
