Silhouette V6-3.4L VIN E (1996)
Backup Lamp: Initial Inspection and Diagnostic Overview
Circuit Operation
When the Ignition Switch is in "RUN," "BULB TEST" or "START," voltage is applied through the TURN B/U Fuse to the Transaxle Range Switch.
When the Transaxle is placed in "Reverse," voltage is applied through the closed contacts of the Transaxle Range Switch, to the RH and LH Backup
Lamps. The Backup Lamps are permanently grounded at G400, and when voltage is applied to CKT 24, the Backup Lamps are "ON."
Chart #3 Backup Lamps ON At All Times
Chart #1 RH And LH Backup Lamps Inoperative
