Silhouette V6-3.4L VIN E (1996)
Spark Plug Wire: Description and Operation
The spark plug wiring used with ignition systems is a carbon impregnated cord conductor, encased in a 7 mm (9/32-inch [or 8mm 5/16inch]) diameter
silicone rubber jacket. The silicone jacket withstands very high temperatures. Silicone spark plug boots form a tight seal on the plug. The boot should
be twisted 1/2 turn BEFORE removing. Care should also be used when connecting a timing light or other pick-up equipment. DO NOT force anything
between the boot and wiring, or through the silicone jacket. Connections should be made in parallel using an adapter. DO NOT pull on the wire to
remove. Pull on the boot, or use a tool designed for this purpose.
