Silhouette V6-3.4L VIN E (1996)
Engine Control Module: Description and Operation
24X Reference PCM Input
From the ignition control module, the PCM uses this signal to calculate engine RPM and crankshaft position at engine speeds below 1200 RPM. The
PCM also uses the pulses on this circuit to initiate injector pulses. If the PCM receives no pulses on this circuit, DTC P0336 will set and the PCM will
use the 3X reference signal circuit at all times for fuel and ignition control. The engine will continue to start and run using the 3X reference signal
only.
