Silhouette V6-3.4L VIN E (1996)
Fig. 12 Turn Signal Switch Arm Removal
7. Remove round washer head screw and signal switch arm, then the oval head cross recess screw, Fig. 12.
8. Remove hazard warning button with hazard warning spring and hazard warning switch knob.
9. Remove binding head cross recess screws, then the turn signal switch assembly, noting the following:
a. Let switch hang freely if removal is not necessary.
b. Disconnect turn signal switch connector from connector body bracket and vehicle wire harness.
c. Disconnect socket and bracket assembly connector terminal from slot "D" of turn signal switch connector.
d. Remove connector body bracket, then the wiring protector.
e. Gently pull wire harness through column.
10. Remove SIR coil assembly with wire harness from column assembly.
