Silhouette V6-3.4L VIN E (1996)
Fluid - A/T: Testing and Inspection
To check fluid, drive vehicle for at least 15 minutes to bring fluid to operating temperature (200°F). With vehicle on a level surface and engine idling
in Park and parking brake applied, the level on the dipstick should be at the FULL mark. To bring the fluid level from the ADD mark to the FULL mark
requires one pint of fluid. If vehicle cannot be driven sufficiently to bring fluid to operating temperature, the level on the dipstick should be between the
two dimples on the dipstick with fluid temperature at 70°F. Note that the two dimples are located above the FULL mark.
If additional fluid is required, use only Dexron IIE automatic transmission fluid.
An early change to a darker color from the usual red color and/or a strong odor that is usually associated with overheated fluid is normal and should
not be considered as a positive sign of required maintenance or unit failure.
When adding fluid, do not overfill, as foaming and loss of fluid through the vent may occur as the fluid heats up. Also, if fluid level is too low,
complete loss of drive may occur especially when cold, which can cause transmission failure.
Every 100,000 miles, the oil should be drained, the oil pan removed, the screen cleaned and fresh fluid added. For vehicles subjected to more severe
use such as heavy city traffic, prolonged periods of idling or towing, this maintenance should be performed every 15,000 miles.
