Silhouette FWD V6-3.4L VIN E (2004)
Front Door Striker: Service and Repair
Front Side Door Lock Striker Replacement
Removal Procedure
1. Open the front door.
2. Scribe the location of the existing front door lock striker on the B-pillar with a grease pencil.
3. Remove the front door lock striker screws.
4. Remove the front door lock striker from B-pillar.
Installation Procedure
1. Install the front door lock striker to the scribed location on the B-pillar.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the front door lock striker screws.
Tighten the screws to 25 N.m (18 lb ft).
Important:
*
Ensure that the front door striker properly engages with the front door lock once the front door is adjusted within the door frame.
*
Use the front door striker in order to ensure the front door is flush.
*
DO NOT use the front door striker in order to raise or lower the front door.
3. Close the front door.