Silhouette FWD V6-3.4L VIN E (2004)
Fuel Door: Service and Repair
Fuel Filler Door Replacement
Fuel Tank Filler Door Replacement
Removal Procedure
1. Open the fuel filler door.
2. Remove the fuel filler cap.
3. Remove the fuel filler pocket. Refer to Fuel Tank Filler Pipe Housing Replacement () .
4. Disconnect the fuel filler door interlock cable from the fuel filler door. Refer to Fuel Filler Door Innerlock Cable Replacement (See: Fuel Filler
Door Innerlock Cable Replacement)
5. Remove the screws from the fuel filler door.
6. Remove the fuel filler door from the vehicle.
Installation Procedure
1. Align the fuel filler door to the vehicle.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the fuel filler door screws.
Tighten the screws to 10 N.m (89 lb in).
3. Connect the fuel filler door interlock cable to the fuel filler door. Refer to Fuel Filler Door Innerlock Cable Replacement (See: Fuel Filler Door
Innerlock Cable Replacement) .
4. Install the fuel filler pocket. Refer to Fuel Tank Filler Pipe Housing Replacement () .
5. Install the fuel filler cap.
6. Close the fuel filler door.