Silhouette FWD V6-3.4L VIN E (2004)
4. Slide the floor console out from the floor console bracket.
Installation Procedure
1. Slide the floor console into place and align the console with the floor console bracket.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the screws to the floor console bracket.
Tighten the screws to 2 N.m (18 lb in).
3. Install the DVD player. Refer to DVD Player Replacement.
4. Install the bezel to the floor console. Refer to Accessory Power Receptacle Replacement - Floor Console.
Console Replacement - Overhead (CF5)
Console Replacement - Overhead (CF5)
Removal Procedure
1. Insert a small, flat-bladed tool between the interior lamp/multifunction switch/reading lamp housing and the overhead console.
2. Press inward and down in order to release the interior lamp/multifunction switch/reading lamp housing from the overhead console.
3. Remove the interior lamp/multifunction switch/reading lamp housing from the overhead console.
