Silhouette FWD V6-3.4L VIN E (2004)
Power Door Lock Actuator: Service and Repair
Lock Actuator Replacement - Front Door
Lock Actuator Replacement - Front Door
Removal Procedure
1. Remove the front door lock module. Refer to Door Module Replacement - Front (See: Door Locks/Door Module/Service and Repair) .
2. Disconnect the front door lock actuator electrical connectors.
3. Remove the front door outside handle lock rod bracket.
4. Remove the front door lock actuator screws.
5. Remove the front door lock actuator from the front door lock.
Installation Procedure
1. position the front door lock actuator to the front door lock.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the front door lock actuator screws.
Tighten the screws to 2 N.m (18 lb in).
3. Install the front door outside handle lock rod bracket.