Silhouette FWD V6-3.4L VIN E (2004)
Seat Heater: Service and Repair
Seat Back Heater Element Replacement - Front
Seat Back Heater Element Replacement - Front
Removal Procedure
1. Remove the front seat. Refer to Seat Replacement - Bucket (See: Service and Repair/Seat Replacement - Bucket) .
2. Remove the head restraint. Refer to Head Restraint Replacement - Front Seat (See: Head Rest/Service and Repair/Head Restraint Replacement -
Front Seat) .
3. Remove the map pocket net. Refer to Map Pocket Net Replacement - Front Seat (See: Service and Repair/Map Pocket Net Replacement - Front
Seat) .
4. Remove the finish covers. Refer to Seat Adjuster Track Cover Replacement - Front (See: Service and Repair/Seat Adjuster Track Cover
Replacement - Front) .
5. Remove the recliner handle and cap. Seat Back Recliner Handle Replacement - Front (See: Seat Back/Service and Repair/Seat Back Recliner
Handle Replacement - Front) .
6. Remove the seat back recliner covers starting at the rear of the cover.
7. Remove the J retainer (1) from the bottom edge of the seat back cover.
8. Remove the recliner bolts.
9. Separate the seat back from the seat cushion.
10. Remove the seat back cover from the seat back cushion while separating the hook and loop retainers.
11. Remove the seat back cover retainer rings (2).
12. Remove the seat back cover (1).
13. Remove the heater element from the seat back pad.
Installation Procedure
1. Install the heater element.
2. Install the seat back cover (1).
3. Install the seat back cover retainer rings (2).
4. Secure the seat back cover to the foam pad with the hook and loop retainers.