Silhouette FWD V6-3.4L VIN E (2004)
Brake Caliper: Service and Repair
Brake Caliper - Overhaul
Front
Brake Caliper Overhaul - Front
Tools Required
-
J 35777 Caliper Piston Seal Installer
Disassembly Procedure
Caution:
Refer to Brake Dust Caution in Service Precautions.
Caution:
Refer to Brake Fluid Irritant Caution.
1. Remove the brake caliper.
Caution:
Do not place fingers in front of the caliper piston(s) in an attempt to catch or protect it when applying compressed air. The piston(s) can fly
out with force and could result in serious bodily injury.
Notice:
Use clean cloths to pad interior of caliper housing during piston removal. Use just enough air to ease the pistons out of the bores. If the
pistons are blown out, even with the padding provided, it may be damaged.
2. Blow compressed air into the brake caliper hole (1) in order to remove the brake caliper piston. The piston will come out through the piston boot.
3. Inspect and replace the brake caliper piston if any of the following conditions are found:
-
Scoring
-
Nicks
-
Corrosion
-
Worn or damaged chrome plating
4. Use a flat-bladed tool to remove the brake caliper piston boot (2).
