Silhouette FWD V6-3.4L VIN E (2004)
8. Use the J 38400 in order to spread the brake shoes apart.
9. Remove the wheel cylinder (1).
10. Clean the old sealant from the backing plate where the wheel cylinder was installed. Clean the sealant from the wheel cylinder if you are reusing
the wheel cylinder.
Installation Procedure
1. Apply LOCTITE GM P/N 12345382 (or equivalent) to the wheel cylinder shoulder face, which contacts the backing plate.
2. Use the J 38400 in order to spread the brake shoes apart.
3. Install the wheel cylinder (3).
4. Install the wheel cylinder bolts (2).
^
Tighten the bolts to 12 Nm (110 inch lbs.).
5. Remove the cap from the brake pipe and install the brake pipe to the wheel cylinder.
