Silhouette FWD V6-3.4L VIN E (2004)
7. Remove the heat shield screws from the cooling fan shroud.
8. Remove the heat shields.
9. Remove the cooling fan motor electrical harness from the cooling fan shroud.
Installation Procedure
1. Install the cooling fan motor electrical harness to the cooling fan shroud.
2. Install the heat shields to the cooling fan shroud.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the heat shield screws.
^
Tighten the screws to 4 Nm (35 inch lbs.).
4. Install the fan motors to the cooling fan shroud.
5. Install the screws to the cooling fan motor
^
Tighten the screws to 6 Nm (53 inch lbs.).
