Silhouette FWD V6-3.4L VIN E (2004)
Heater Core: Service and Repair
Heater Case/Cover Replacement
HEATER CORE COVER REPLACEMENT
REMOVAL PROCEDURE
1. Remove the floor air outlet duct.
2. If equipped, disconnect the DVD wiring harness from the I/P support bracket.
3. Remove the screws retaining the heater core cover.
4. Remove the heater core cover.
INSTALLATION PROCEDURE
1. Install the heater core cover.
2. Install the heater core cover retaining screws.
NOTE: Refer to Fastener Notice in Service Precautions.
See: Heating and Air Conditioning/Service Precautions/Vehicle Damage Warnings
Tighten
Tighten the screws to.....1.6 N.m (14 lb in).
3. If equipped, connect the DVD wiring harness to the I/P support bracket.
4. Install the floor air outlet duct.