Silhouette FWD V6-3.4L VIN E (2004)
IMPORTANT:Disconnect the throttle and cruise control cables to prevent bending the cable housings.
6. Remove the transmission fluid filler tube.
7. Release the inlet heater hose quick connect from the inlet pipe (2).
8. Disconnect the inlet heater hose (1) from the inlet pipe (2).
9. Reposition the inlet heater hose clamp at the heater core using the J 38185.
10. Disconnect the inlet heater hose from the heater core.
11. Reposition the inlet heater hose clamp from the auxiliary heater inlet line using the J 38185.
12. Disconnect the inlet heater hose from the auxiliary heater inlet line.
13. Remove the inlet heater hose.
INSTALLATION PROCEDURE