Silhouette FWD V6-3.4L VIN E (2004)
Thermostat Bypass Hose: Service and Repair
Thermostat Bypass Pipes Replacement
Removal Procedure
1. Drain the cooling system.
2. Remove the spark plug wire harness from the thermostat bypass pipe.
3. Remove the thermostat bypass pipe to throttle body nut.
4. Remove the thermostat bypass pipe to throttle body hose clamps (1).
5. Remove the thermostat bypass pipe to cylinder head nut (3).
6. Remove the thermostat bypass pipe bolt (4).
7. Remove the thermostat bypass pipe hose clamp (5).
8. Remove the thermostat bypass pipe hose.
9. Remove the thermostat bypass pipe.