Silhouette FWD V6-3.4L VIN E (2004)
8. Remove the engine coolant heater cord from the engine coolant heater.
9. Remove the engine coolant heater cord.
Installation Procedure
1. Install the engine coolant heater cord to the engine coolant heater.
2. Properly route the coolant heater cord.
3. Use 3 new tie straps (1) in order to secure the coolant heater cord to the engine lower wiring harness.
4. Install the right engine splash shield.
5. Install the right front wheel.
6. Lower the vehicle.
7. Use 2 new tie straps in order to secure the coolant heater cord to the engine upper wiring harness.