Silhouette FWD V6-3.4L VIN E (2004)
4. Install the engine mount bracket-to-oil pan bolts.
Tighten the bolts to 58 Nm (43 ft. lbs.).
5. Use the utility stand in order to lower the engine.
6. Install the engine mount lower nuts.
Tighten the nuts to 47 Nm (35 ft. lbs.).
7. Install the right engine splash shield.
8. Install the right front wheel and tire.
9. Connect the three-way catalytic converter pipe to the engine right side exhaust manifold.
10. Lower the vehicle.
11. Install the engine mount struts.
12. Install the throttle body air inlet duct.
