Silhouette FWD V6-3.4L VIN E (2004)
Oil Cooler: Service and Repair
Oil Cooler Outlet Line Replacement
Oil Cooler Outlet Line Replacement
Removal Procedure
1. Drain the engine coolant from the cooling system.
2. Remove the oil cooler pipe bracket bolt from the oil cooler pipe bracket at the right engine mount strut bracket.
3. Disconnect the upper oil cooler outlet hose from the thermostat bypass pipe.
4. Raise and support the vehicle. Refer to Vehicle Lifting.
5. Disconnect the lower oil cooler outlet hose from the oil cooler.
6. Remove the oil cooler outlet hoses and pipe.
7. Remove the upper and/or lower oil cooler outlet hose(s) from the oil cooler pipe.
Installation Procedure