Silhouette FWD V6-3.4L VIN E (2004)
4. Install the drive belt shield bolt.
Tighten the bolt to 10 Nm (89 inch lbs.).
5. Install the engine front cover gasket.
6. Apply sealer GM P/N 12346004 or the equivalent to both sides of the lower tabs of the engine front cover gasket.
7. Install the engine front cover.
Notice: Refer to Fastener Notice in Service Precautions.
8. Install the engine front cover bolts (3).
Tighten the bolts (3) to 55 Nm (41 ft. lbs.).
9. Install the engine front cover bolt (1).
Tighten the bolt (1) to 47 Nm (35 ft. lbs.).
10. Install the engine front cover bolts (2).
Tighten the bolts (2) to 21 Nm (16 ft. lbs.).
