Silhouette FWD V6-3.4L VIN E (2004)
1. Install the muffler and exhaust pipes over the rear axle and towards the rear of the vehicle.
2. Install the exhaust hanger insulators to the exhaust pipes.
3. Install rear crossover. AWD models refer to Crossmember Replacement.
4. Install a new catalytic converter gasket.
Notice: Refer to Fastener Notice in Service Precautions.
5. Install the catalytic converter bolts.
Tighten the catalytic converter bolts to 34 Nm (25 ft. lbs.).
6. Lower the vehicle.
