Silhouette FWD V6-3.4L VIN E (2004)
7. Remove the air temperature actuator mounting screws.
8. Remove the air temperature actuator.
INSTALLATION PROCEDURE
1. Install the air temperature actuator.
2. Install the air temperature actuator mounting screws.
NOTE: Refer to Fastener Notice in Service Precautions.
See: Service Precautions/Vehicle Damage Warnings
Tighten
Tighten the screws to.....1.6 N.m (14 lb in).
3. Connect the air temperature actuator electrical connector.
4. Install the temperature door lever (1) to the temperature door.
IMPORTANT:Align the pin on the air temperature actuator with the slot in the temperature door lever.