Silhouette FWD V6-3.4L VIN E (2004)
7. Remove the retainer and bolts from the middle air distribution duct.
8. Remove the middle air distribution duct from the auxiliary HVAC module assembly.
9. Remove the middle air distribution duct from the rear quarter.
INSTALLATION PROCEDURE
1. Install the middle air distribution duct to the rear quarter.
2. Install the middle air distribution duct to the auxiliary HVAC module assembly.
3. Install the middle air distribution retainers.
4. Install the middle air distribution duct bolts.
NOTE: Refer to Fastener Notice in Service Precautions.
See: Service Precautions/Vehicle Damage Warnings
Tighten
Tighten the bolts to.....10 N.m (89 lb in).
5. Install the auxiliary mode actuator.
