Silhouette FWD V6-3.4L VIN E (2004)
Tighten
Tighten the bolt to.....2.5 N.m (22 lb in).
10. Install the radiator and condenser assembly.
11. Remove cap or tape from the evaporator inlet tube.
12. Install a new sealing washer to the evaporator inlet fitting.
13. Install the evaporator inlet tube and bolt to the condenser block.
Tighten
Tighten the bolt to.....16 N.m (12 lb ft).
14. Remove cap or tape from the A/C discharge hose.
15. Install a new sealing washer to the A/C discharge hose fitting.
16. Install the A/C discharge hose and nut to the condenser block.
Tighten
Tighten the nut to.....16 N.m (12 lb ft).
17. Connect the lower TOC line to the radiator.
