Silhouette FWD V6-3.4L VIN E (2004)
3. Install the A/C refrigerant pressure sensor to the evaporator inlet tube.
NOTE: Refer to Fastener Notice in Service Precautions.
See: Service Precautions/Vehicle Damage Warnings
Tighten
Tighten the sensor to.....5 N.m (44 lb in).
4. Connect the A/C refrigerant pressure sensor electrical connector.
5. Leak test the fittings of the component using J 39400-A.
6. Install the air baffle.
7. Install the air baffle bolts.
Tighten
Tighten the bolts to.....20 N.m (15 lb ft).
8. Lower the vehicle.
