Silhouette FWD V6-3.4L VIN E (2004)
2. Connect the outlet heater hose to the heater core.
3. Position the heater hose clamp using the J 38185.
4. Connect the outlet heater hose (3) to the outlet pipe (4).
5. Install the transmission fluid filler tube.
6. Connect the throttle and cruise control cables to the TBI mounting bracket.
7. Install the air cleaner cover and intake tube.
8. Connect the vacuum hose to the brake booster.
9. Install the left wiper arm linkage.
10. Install the left wiper arm linkage nuts.
NOTE: Refer to Fastener Notice in Service Precautions.
See: Heating and Air Conditioning/Service Precautions/Vehicle Damage Warnings
Tighten
Tighten the nuts to.....5 N.m (44 lb in).
11. Fill the cooling system.
RPO Code C69 (HVAC RR Air Conditioner)
HEATER HOSE REPLACEMENT - OUTLET (WITH RPO CODE C69)
TOOLS REQUIRED
J 38185 Hose Clamp Pliers
REMOVAL PROCEDURE
1. Drain the cooling system.
2. Remove the left wiper arm linkage nuts.
Reposition the left wiper arm linkage for access.
3. Disconnect the vacuum hose from the brake booster and reposition.
