Silhouette FWD V6-3.4L VIN E (2004)
Relay Box: Service and Repair
IP Electrical Center or Junction Block Replacement
INSTRUMENT PANEL ELECTRICAL CENTER OR JUNCTION BLOCK REPLACEMENT
REMOVAL PROCEDURE
1. Disconnect the battery negative cable.
2. Remove the fuse block I/P end cover.
3. Release the front retainer on the fuse block.
4. Push the fuse block into the instrument panel.
5. Remove the fuse block from the instrument panel.
6. Remove the electrical connectors from the fuse block.
INSTALLATION PROCEDURE
1. Install the electrical connectors into the fuse block.