Silhouette FWD V6-3.4L VIN E (2004)
6. Remove the accelerator cable from the vehicle. Note the cable routing for aid in installation.
INSTALLATION PROCEDURE
NOTE: Do not route flexible components (hoses, wires, conduits, etc.) within 50 mm (2 in) of moving parts unless flexible components can be
securely fastened. This is necessary in order to prevent possible interference and damage to the component.
1. Install the accelerator cable into the vehicle using routing noted during removal.
2. Connect the accelerator cable through the slot in the accelerator pedal lever.
3. Seat the snap retainer in the accelerator pedal lever.