Silhouette FWD V6-3.4L VIN E (2004)
1. Install the seat belt retractor to the C-pillar.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Use the J 29843-9 in order to install the bolt securing the seat belt retractor to the C-pillar.
Tighten
Tighten the seat belt retractor bolt C-pillar to 43 N.m (32 lb ft).
3. Install the cup holder/armrest trim cover (3) in place on the passengers side.
4. Use the J 29843-9 in order to install the bolt (5) securing the lower seat retractor side belt anchor (4) to the C-pillar.
Tighten
Tighten the lower seat belt anchor bolt C-pillar to 43 N.m (32 lb ft).
5. Install the seat belt anchor to the mini-buckle on the vehicles with the 60/40 split bench.
6. Use the J 29843-9 in order to install the bolt (2) securing the upper seat belt anchor (1).
Tighten
Tighten the upper seat belt anchor bolt C-pillar to 43 N.m (32 lb ft).
7. Install the cover onto the upper seat belt anchor (1).