Silhouette FWD V6-3.4L VIN E (2004)
Impact Sensor: Service and Repair
Side
INFLATABLE RESTRAINT SIDE IMPACT SENSOR REPLACEMENT
REMOVAL PROCEDURE
1. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 7 or SIR Disabling and Enabling Zone 9.
2. Remove the seat belt retractor trim cover.
3. Loosen the inflatable restraint side impact sensor fasteners (2).
4. Remove the inflatable restraint side impact sensor (1) from the center pillar.
5. Remove the connector position assurance (CPA) (3) from the inflatable restraint side impact sensor yellow 2-way wiring harness connector (2).
6. Disconnect the inflatable restraint side impact sensor wiring harness connector (2).
INSTALLATION PROCEDURE