Silhouette FWD V6-3.4L VIN E (2004)
4. Install the positive battery cable lead (2) to the stud on the underhood electrical center.
5. Install the positive battery cable retaining nut (1).
Tighten
Tighten the positive battery cable nut to 16 N.m (12 lb ft).
6. Connect the negative battery cable.
7. Install the right sheet metal diagonal brace.
8. Position the underhood electrical center to the right sheet metal diagonal brace and rotate into position.
9. Install the bolt to the electrical center at the upper tie bar.
Tighten
Tighten the underhood electrical center to upper tie bar bolt to 2 N.m (18 lb in).