Silhouette FWD V6-3.4L VIN E (2004)
Air Filter: Service and Repair
Automatic Level Control Air Filter Hose Replacement
Automatic Level Control Air Filter Hose Replacement
Removal Procedure
1. Raise and support the vehicle.
2. Squeeze the clips on the side of the air compressor filter in order to remove the filter from the underbody rail.
3. Remove the air compressor filter hose from the air compressor at 2 places.
4. Remove the automatic level control filter hose.
Installation Procedure
Important: Ensure that the hose is routed properly in order to prevent the hose from contacting the automatic level control air compressor shield.
1. Install the air compressor filter hose to the air compressor at 2 places.
2. Install the air compressor filter to the underbody rail.
3. Lower the vehicle.
