Silhouette FWD V6-3.4L VIN E (2004)
Compressor/Pump: Service and Repair
Air Compressor Replacement
Air Compressor Replacement
Removal Procedure
1. Raise and support the vehicle.
2. Squeeze the clips on the side of the air compressor filter (1) in order to remove the filter from the underbody rail.
3. Remove the compressor bracket bolt.
4. Remove the compressor bracket nuts. Allow the compressor to hang from the bracket hook.
5. Remove the air line from the air dryer.
6. Disconnect the air compressor electrical connector.
7. Rotate the air compressor and the bracket 90 degrees in order to disengage the compressor bracket hook from the vehicle.
8. Remove the air compressor with the air compressor bracket.
9. Remove the air compressor dryer.
10. Remove the air compressor relay from the air compressor bracket.
