Silhouette FWD V6-3.4L VIN E (2004)
Suspension Strut / Shock Absorber: Service and Repair
Front Suspension
Strut Assembly Replacement
The content of this article reflects the changes identified in TSB Bulletin No. #05-03-08-013 dated September 02, 2005
.
Strut Assembly Replacement
Removal Procedure
Notice: Refer to avoid chipping or scratching the coating in Service Precautions.
Important: Lift the vehicle using ONLY a frame-contact vehicle lift. Do NOT lift the vehicle using a suspension-contact vehicle lift.
1. Raise and support the vehicle.
2. Remove the tire and wheel.
3. Remove the wiper module.
Important: Lift the vehicle using ONLY a frame-contact vehicle lift. Do NOT lift the vehicle using a suspension-contact vehicle lift.
4. Raise and support the vehicle.
5. Remove the tire and wheel.
6. Remove the strut upper nuts.
