Silhouette FWD V6-3.4L VIN E (2004)
8. Remove the accumulator (132).
9. Remove the manual 2-1 band servo cover (104).
10. Remove the manual 2-1 band servo (106-116).
11. Remove the manual 2-1 band servo cover gasket (105).
12. To disassemble, inspect and service the accumulator and manual 2-1 band servo, refer to Transmission/Transaxle/Transfer Case Unit Repair.
Installation Procedure
1. Install the manual 2-1 band servo cover gasket (105) into the case. Lubricate the manual 2-1 band servo cover gasket with automatic transmission
fluid.
2. Install the manual 2-1 band servo (106-116).
3. Install the manual 2-1 band servo cover (104).
