Silhouette FWD V6-3.4L VIN E (2004)
30.
Remove the wiring harness connectors.
31.
Remove the case side cover bolts (56-58).
32.
Remove the case side cover pan (53).
33.
Remove the case side cover gasket (54).
34.
Remove the case side cover inner gasket (59).
35.
Inspect the case side cover (53) for the following conditions:
-
Damaged or porous gasket sealing surfaces
-
Damaged or porous casting surfaces
-
Damaged or stripped bolt holes
38.
Inspect the case side cover gasket (54) and case side cover inner gasket (59) for damage. The gaskets are reusable if they are NOT damaged.
39.
Clean the case side cover.
40.
Clean the case side cover gasket surfaces.
Installation Procedure